How do I create a custom Retention Centre action?

From Catalyst
Revision as of 05:33, 19 June 2019 by ThrashBot (talk | contribs) (Bulk update)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Summary

This article will explain how to create a custom Retention Centre Action.

More Information

Go to " Reports & Settings Maintenance Options System Administrator Platinum Settings Retention Centre Settings". This holds all the Retention Centre settings, so you can create a Unit Sales, Workshop or normal customer Retention Centre action from here.

Creating the Action

To create a new action, you will need to:

  • Press <Alt+F10> to create a new Retention Centre action.
    • On "Action:" enter a 'Description' for the action.
    • On "System:" select the system to which this action applies, either 'Accounts', 'Unit Sales' or 'Workshop'.
    • Enter the number of days from the event at which the action will be triggered in both the:
      • "From:" which is the upper limit of days.
      • "To:" which is the lower limit of days.
    • If the retention centre action is to have a follow up then:
      • Enter the 'User Code' of the "Sales person to pursue:".
      • The number of 'days' in the "Follow days:" before pursuing the retention centre action.
      • Enter the 'User Code' of the employee for whom the follow up task will be created in the "Employee task:".
    • Enter the Media Preference by entering a number from '0' to '3' against "Mail:", "SMS:" and "E-mail:".
Entering '0' here will disable the media type. Entering '3' makes the relevant medium your preferred method and entering a '1' sets it to the least preferred method of contact.
    • If you want the Retention Centre action to print out an address label in conjunction with the "Mail:" media preference, set "Labels:" to 'Yes'.
    • On "Block days:" enter the number of 'days' after which to block the repetition of the retention centre action.
    • Select the "Report range:" on whether the retention centre action will be produced by 'Account', 'Unit' or 'Job'.

All that is left is to assign the media output, whether this is a report or a message.

Selecting Media Output

In order to select the output option you will need to click on the output option you want to set and press <F2>.

  • On "Output type:" select either 'Report' to use a standard/user report or a 'Message'.
  1. If you selected 'Report' then you will need to select:
    • "Report system:" - Which part of the system the report is located, whether it be 'Reports & Settings', 'Unit Sales' or 'Workshop'.
    • "Report type:" - Whether or not the report is a 'System' or a 'User' report.
    • "Report Code:" - The 'Unique Code' of the report.
  2. If you selected 'Message' then you will need to 'type' the text of the "Message:" here.
  • Click [Close] or press <Esc> to save the settings.
Please see below for an example of a "Media Output" report.
Now that you have created a new action and have assigned the media output you will need to save the set-up, this is done by simply exiting out of the " Customer Retention Settings".

Triggering the Action to Run

In order to trigger the newly created Retention Centre Action, you will need to add a filter report that commands how the action runs. To do this you will need to highlight the newly created Retention Centre Action and press <F7> or click on the [Filter] button at the bottom of the screen.

  • Here you will need to enter details of the report you will use as a filter.
    • "Report System:" - Enter the area of the system where the report is located, whether that is, 'Reports & Settings', 'Unit Sales' or 'Workshop'.
    • "Report type:" - Whether or not the report is a 'System' or 'User' report.
    • "Report Code:" - The 'Unique Code' of the report.
  • Press <Esc> or click [Close] to save the settings.
Please see below for an example of the "Filter" report.

Example of a Media Output Report and Filter Report

This example is assuming that the Media Selection is going to be a report and that it only sends out a "Happy Halloween" message to all customers via a SMS message.

The two reports are going to be customer-based and are written in the Accounts Reports Generator. Go to " Reports & Settings Reports Accounts Report Generator".

Creating a Media Output Report

  • Press <F6> or click [Add] to create a new report.
  • In "Report code:" enter '~HA'.
  • In "Description:" enter 'SMS Halloween Wishes'.
  • Click [OK].
    • Click on [Sort Order] against "Var.1" enter 'A02' and press <Esc>.
    • Click on [Range Filter (1)], below "Var" enter 'A01' and press <Enter> twice, then enter a capital 'S' below "Limit/Comparison", then press <Esc>.
    • Click on [Column Details].
      1. Press <F2> creating "Row/Col No.:"'1/01'.
        • Then press <Enter> twice leaving you on "Column Type:" enter a capital 'Q'.
        • Then press <Enter> leaving you on "Text:" and type <Everybody at>.
        • Then press <Esc> and click [Accept].
      2. Press <F2> creating "Row/Col No.:"'1/02'.
        • Then press <Enter> twice leaving you on "Column Type:" enter a capital 'F'.
        • Then press <Enter> leaving you on "File Var.:" and enter 'D20'.
        • Then press <Esc> and click [Accept].
      3. Press <F2> creating "Row/Col No.:"'1/03'.
        • Then press <Enter> twice leaving you on "Column Type:" enter a capital 'Q'.
        • Then press <Enter> leaving you on "Text:" and type <would like to wish you a Spooky Ghoulish Halloween. Dont>.
        • Then press <Esc> and click [Accept].
      4. Press <F2> creating "Row/Col No.:"'1/04'.
        • Then press <Enter> twice leaving you on "Column Type:" enter a capital 'Q'.
        • Then press <Enter> leaving you on "Text:" and type <forget to carve those Awesome Pumpkins.>.
        • Then press <Esc> and click [Accept], then press <Esc>.
    • Click on [Output Options].
      • Set the "Style:" to 'E', the "Del.:" to 'a space' and set "Quotes:" to 'N'.
      • Set the "Output:" to 'P'.
      • Set "Printer Rec.:" to your 'Silent SMS' print record. As standard this will be "93".
      • Press <Esc>.
    • Click [Finish Editing] and click [Accept].

Creating a Filter Report

  • Press <F6> or click [Add] to create a new report.
  • In "Report code:" enter '~HF'.
  • In "Description:" enter 'Halloween Filter'.
  • Click [OK].
    • Click on [Sort Order] against "Var.1" enter 'A02' and press <Esc>.
    • Click on [Range Filter (1)].
      1. Below "Var" enter 'A01' and press <Enter> twice, then enter a capital 'S' below "Limit/Comparison", then press <Enter> twice.
      2. Below "A01" enter 'D13' and press <Enter> twice, then enter a '>=' below '=' in the "Op." column, then press <Enter> and enter '28/10/2012', then press <Enter> twice.
      3. Below 'D13' enter another 'D13' and press <Enter> twice, then enter a '<=' below '>=' in the "Op." column, then press <Enter> and enter '31/10/2012', then press <Esc>.
    • Click on [Column Details].
      • Press <F2> creating "Row/Col No.:"'1/01'.
      • Then press <Enter> twice leaving you on "Column Type:" enter a capital 'Q'.
      • Then press <Enter> leaving you on "Text:" and type <Y>.
      • Then press <Esc> and click [Accept], then press <Esc>.
    • Click on [Output Options].
      • Set the "Style:" to 'R'.
      • Set the "Output:" to 'I'.
      • Set the "Report Category:" to 'INT'.
      • Press <Esc>.
    • Click [Finish Editing] and click [Accept].

See also


Feedback
Thank you for using our Knowledge Base, we value your feedback. Did you find this article useful? 'Yes' or 'No'
Keywords AND Misspellings
custom, retention, centre, action, create, make, letter, email, sms, messaging, media, text, customer, marketing, contact, letters, emails, message, messages, bulk, texts, txt, txts, wishes, greetings, bday, xmas, market