Recommended logistics management planning routines

From Catalyst
Revision as of 14:16, 4 April 2012 by Richard Green (talk | contribs) (Stage 5 - Invoicing)
Jump to: navigation, search

Summary

Within any business, there a number of routine daily, weekly and monthly tasks that need to be carried out in order for the business to operate smoothly and efficiently, and to enable any errors to be picked up at an early stage. The following article sets out the preferred routines for Logistics purposes by going over the workflow of a Logistics Job from Start (Initial entry) to Finish (Invoicing).

PLEASE NOTE: This article is written with the Automatic Status change system in mind. If you do not have this feature and wish to or have the feature and would like it to be disabled. please Contact your Platinum dealer or our support team on 0116 230 1500 or by using our website support contact page for more information.

More Information

There are 2 options when processing a job, one without the POD scanning process and one with the Scanning process in Place. Please refer to the relevant section for your procedure.

Information: If you do not have the POD Scanning and image storage feature but wish to . please Contact your Platinum dealer or our sales team on 0116 230 1500 or by using our website sales contact page for more information.
PLEASE NOTE: The Status colours outlined here are the standard colours, this can be altered if required.

Logistics Job Process without POD Scanning

When Planning your jobs using the Platinum system there will be an agreed time of day when all the jobs for the next day have arrived. This is often late afternoon or early morning, all faxed\emailed jobs have arrived and any telephone ordered job requests for the next day have been taken. At this point the Job planning process can begin.

Stage 1 - Job Creation

Any jobs should be created with minimal information on them in the first instance to allow for quick and efficient entry of Jobs as there will usually (hopefully) be quite a few. Initially the only things that need to be entered are "Account code", "Remarks", "Collect", "Deliver". The "Job number" will be entered automatically by the system.

Once accepted the job will be created with a status of

UNP – Unplanned.

Stage 2 - Allocating Drivers and Vehicles

The next stage of the process will be to allocate Vehicles and drivers to your jobs.

Once both the "Driver" and "Vehicle" are entered and accepted the jobs status will automatically change to

PPR – Planned, Pricing Required.

Tip: Both the "Driver" and "Vehicle" fields MUST be filled in for the status of the job to change from 'Unplanned' to 'Planned, Pricing required'.

Stage 3 - Pricing

The Next stage of the process is to price your jobs. This is done by filling in the "Rate" and "Quantity" fields if you price your jobs by a rate or by adding a "Nett" if you price your jobs by a total amount.

Once the Pricing has been entered and the changes accepted the status will automatically change to

PAP – Planned & Priced.

Stage 4 - Delivery Confirmation

Usually your Drivers will get into contact by some means once they had "Dropped" a load at its destination. Once you receive this confirmation you can use the [Delivered] Button shown at the top of the Platinum screen when said job is highlighted to change the status of that job

If the Price has already been entered the status of this job will automatically change to

RTI – Ready To Invoice.

If the Pricing has NOT been entered the job will change to

DPI – Delivered, Pricing Required

...and once the price had been entered the status will automatically change again to

RTI – Ready To Invoice.

Stage 5 - Invoicing

Normally at a given point of the day\week\month you will want to invoice all your completed Logistics Jobs. At this stage you can then use the " Logistics Management Invoice Production" option (See Here for more help on this)

Once all invoices have been produced and accepted the status on those Jobs will change to

INC – Invoiced Completed

The Job will disappear from the ongoing list of jobs on the Planning screen.

Logistics Job Process with POD Scanning

Stage 1 - Job Creation

Any jobs should be created with minimal information on them in the first instance to allow for quick and efficient entry of Jobs as there will usually (hopefully) be

quite a few. Initially the only things that need to be entered are "Account code", "Remarks", "Collect", "Deliver". The "Job number" will be entered automatically by the system.

Once accepted the job will be created with a status of

UNP – Unplanned.

1 UNP – Unplanned

Stage 2 - Allocating Drivers and Vehicles

The next stage of the process will be to allocate Vehicles and drivers to your jobs.

Once both the "Driver" and "Vehicle" are entered and accepted the jobs status will automatically change to

PPR – Planned, Pricing Required.

Tip: Both the "Driver" and "Vehicle" fields MUST be filled in for the status of the job to change from 'Unplanned' to 'Planned, Pricing required'.

2 PPR – Planned, Pricing Required

Stage 3 - Pricing

The Next stage of the process is to price your jobs. This is done by filling in the "Rate" and "Quantity" fields if you price your jobs by a rate or by adding a "Nett" if you price your jobs by a total amount.

Once the Pricing has been entered and the changes accepted the status will automatically change to

PAP – Planned & Priced.

3 PAP – Planned & Priced

Stage 4 - Delivery Confirmation

4 DPI – Delivered, Pricing Required 5 DEL – Delivered, Awaiting POD 6 RTI – Ready To Invoice

Stage 5 - Invoicing

7 INP – Invoiced, Awaiting POD 8 INC – Invoiced Completed


See also


Feedback
Thank you for using our Knowledge Base, we value your feedback. Did you find this article useful? 'Yes' or 'No'
Keywords AND Misspellings
PROCESSING, PROCEDURES, RECOMMENDED, , logistics, sequence, Ticket, invoice, job