Adding a stock/bin location to a stock code

From Catalyst
Revision as of 15:20, 16 March 2023 by Katy Kitchen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Summary

The following article explains how to add a Bin Location to a part number.

More Information

Select " Stock Control Add or Edit Stock Items".

  • This will take you to a search screen. Type either the stock code of the item required (e.g. 'NGK1234') or the the description (e.g. NGK Spark plug).
  • Click [Edit] to select the item for which you want to add a location.
  • Click on the "Location" field.

Alternatively press <F4> or click on the [Depots] tab.

    • Click in the "Location" field for your Depot.
  • Enter an existing location or press <Ctrl+F1> to search through existing locations.
    • To add a new location click [Add].
    • Enter the new Location code in the "Location" field.
This field can include letters and numbers, up to a maximum of 20 characters.
    • Click [Done] and [Accept] to save the new location and return to the stock item.
  • Click [Done] and [Accept] to save the settings.

Creating Multiple Locations

You may create a range of locations to select from when locating a stock code. Use this option with caution as it can be quite powerful!

  • Go to " Stock Control Maintenance Options Add or Edit Stock Locations".
  • Click {[Multiple] or press <Shift+F6>.
  • Use the "Section" option to set your parameters. The parameters you use will depend on the locations you wish to create. The example below can be used as a guide.

For example: to create a range of locations starting with the phrase 'Rack' such as RACK01, RACK02, RACK03 etc.

  • At "Section 1" use the drop down to select 'Fixed Text'.
  • Enter the phrase 'RACK' in the "Fixed Text" field.
  • At "Section 2" use the drop down to select 'Numeric Sequence'.
  • At "Seq. length" enter '2' to allow for numbering of up to 2 decimal places.
  • At "Seq. count" enter '20' to create 20 locations.
  • Click [Start] to create your locations.
  • This will create 20 locations from RACK01 to RACK20.
Prior to exiting the screen, if you find you have made a mistake you may click [Undo] at the top of the screen and it will remove the locations created in this instance.

See also


Feedback
Thank you for using our Knowledge Base, we value your feedback. Did you find this article useful? 'Yes' or 'No'
Keywords AND Misspellings
stock, bin, locations, location, rack, stock take